Basic Info.
Type
water-reducing admixture
Visual Appearance
Colorless or Yellowish Liquid
Solid Content
40.0%±1.0%, 50.0%±1.5%
Cement Paste Fluidity
≥230mm
Product Description
BOK PCE WR168 Polycarboxylate superplasticizer (Water reducing style)Product introduction BOK PCE WR168 is a environmental polycarboxylate superplasticizer. It is a concentrated product. Due to high water reducing rate and low alkali content, it can be widely used in all kinds of high-performance concrete such as retarding concrete,precast concrete,cast -in-place concrete,high performance concrete,flow state concrete,self-compacting concrete and mass concrete. It is widely used in project such as high-speed railway,large bridge,hydroelectric project,nuclear power plant,metro,high way,harbor.Principle of function Molecular main chain of polycarboxylate high performance water reducer is firmly adsorbed on surface of cement granule where can efficiently counteract hydration reaction and increase its plasticity. Branched chain surround cement granule having sterically hindered and electrostatic exclusion function which is different from conventional imparts excellent dispersing ability and effect of water reducing which make integrative characteristics of concrete improve greatly.Production Characteristic 1. High water reduction: The water reduction rate of concrete is above 40%. 2. Easying to control production: Controling water reduction ratio, plasticity and air entraining by adjusting molecular weight of main chain, length and density of side chain, type of side chain group. 3. Good dispersion: High fluidity of concrete results in deposing and compacting easily for self-compacting concrete. 4. High strength gained rate: Greatly increasing early and after strength, reducing energy loss. Reduction of cracking, shrinkage and creep. 5. Wide adaptability: It is compatible with ordinary silicate cement, silicate cement, slag silicate cement and all kinds of blendings having excellent dispersibility and plasticity. 6.Good strength and durability: low lacuna rate, low alkali and chlorin-ion content. Enhancing concrete strength and durability.7. Environmental friendly products: No pollution during production. 8. Low-consume, Low-cost: It can be produced in little cycle and little-consume. So it having low-cost. Especially it can be used in commercial concrete. Methods of use 1. The dosage of BOK PCE WR168 is suggested as follows (wt.% of cement): 0.25%-0.8%. 2. It can be mixed in metric water or added in concrete mixer. The recommended stirring time is 150s at least. Concrete mixing test should be made before using in order to insure concrete quality. 3. It can be compounded together retarder, defoamer, air-entertraning reagent, lignin sulfonic natrium and so on. 4. product is a product as raw materials. It is not suggested to use BOK PCE WR168 products directly in concrete or other materials without formulation blending. The compatiblity of BOK PCE WR168 products to particular cement, aggregate and the other raw materials in the application is not guaranteed. It should be obtained through trial mixes and formulation technologies by the users. Scope of application 1. BOK PCE WR168 is a superplasticizer used in premix of construction and cast-in-place concrete. 2. It is especially suitable high strength concrete for railway, haven, traffic, bridge and electric power and so on. 3. It is suitable for the preparation of high strength, high durability, self-compacting, steel fiber and self-leveling concrete. Technical specification | Items | Unit | Specification |
| Visual Appearance | / | Colorless or yellowish liquid |
| Density | g/cm3 | 1.10±0.05 |
| PH Acidity | % | 6.5±1.0 |
| Solid Content | % | 40.0±1.0 , 50.0±1.5 |
| Cl- | % | ≤0.2 |
| Na2SO4 | % | ≤0.5 |
| Cement Paste Fluidity | mm | ≥230 |
Physical & Mechanical properties |
| Test Items | Corporation Specification | Test Result |
| Water Reduction Rate% | ≥25 | 36 |
| Bleeding Ratio% | ≤60 | 0 |
| Air Content% | ≤6 | 3.5 |
| Slump Retention(60min)mm | ≤80 | 40 |
Compressive
Strength Ratio% | 1d | ≥170 | 220 |
| 3d | ≥160 | 210 |
| 7d | ≥150 | 195 |
| 28d | ≥140 | 180 |
| Shrinkage% | 28d | ≤110 |
| Steel reinforcement corrosion | no | no |
Address:
Nanhan Village, Luocun Town, Zichuan District, Zibo City, Shandong Province
Business Type:
Trading Company
Business Range:
Chemicals, Health & Medicine, Light Industry & Daily Use
Management System Certification:
ISO 9001, ISO 9000
Company Introduction:
Established in 2010, shandong boke chemical Co., Ltd. is a well-known enterprise in polymer polyether industry in China. When the outbreak comes, the company makes use of its strong technical strength and production capacity to provide disinfection products such as disposable disinfection hand-washing gel and 84 disinfectant for the prevention and control of the epidemic. The production line of medical masks is also under construction, and has been listed as a key protection enterprise of national epidemic prevention and control materials. At present, the global epidemic is getting more and more serious, the company is ensuring the supply of domestic epidemic prevention materials at the same time, it is actively providing high-quality products for the global epidemic fighting.
